Flavour variety packs buying guide for Liverpool (2026) (v4)
Flavour variety packs advice for Liverpool, covering storage, what to look for and where the trade-offs actually sit.
Budget matters in Liverpool, but with flavour variety packs the cheapest option is rarely the one that lasts. Expect roughly 1664 full puffs from a charge at 6 mg/ml, based on average session length in our testing.
Anyone who has compared flavour variety packs options in Liverpool quickly learns that specification lists only tell part of the story. The 2.0 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem.
The Emerald finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily. Worth noting that the 510 thread takes a small amount of care to keep clean, which we cover in the maintenance section below. For diy mixers, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge.
Vapour production is more than adequate at 90, and pushing beyond that adds heat rather than anything worth carrying. Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all. The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help.
What surprised us most was how little the 1.0 Ω mesh coil changes the draw character compared with the 35:65 PG/VG liquid sitting in the chamber. Charging over Micro-USB takes about 51 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries. Worth noting that the 510 thread takes a small amount of care to keep clean, which we cover in the maintenance section below.
Battery behaviour is where the Smok Morph earns its keep: the 650 mAh cell holds a usable charge for most of a day at 90 and recharges over Micro-USB. We would pair the Smok Morph with a 35:65 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably. Replacement coils are widely available, and the 1.0 Ω mesh coil is the sensible default to keep in stock.
Two things to check before ordering: the Micro-USB socket on the base and whether the 1.0 Ω mesh coil is the newer generation. The 2.0 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month.
Airflow control on the Smok Morph is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank. The silicone tip mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips. Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all.
Specifications
Specifications vary by batch, so treat these figures as the reference point rather than a guarantee for every unit.
| Reference model | Smok Morph |
|---|---|
| Brand family | Asvape |
| Battery capacity | 650 mAh |
| Power range | 90 W |
| Liquid capacity | 2.0 ml |
| Coil | 1.0 Ω mesh |
| Bottle size | 1.6 ml |
| Liquid ratio | 35:65 PG/VG |
| Nicotine strength | 6 mg/ml |
| Material | zinc alloy |
| Charge port | Micro-USB |
| Connector | 510 thread |
| Airflow | ring control |
| Mouthpiece | silicone tip |
Flavour and performance notes
A representative profile is Cinnamon Danish: sweet, spiced, described as cinnamon pastry with a light glaze. On a 35:65 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 1.0 Ω mesh mark before the coil begins to mute it.
Practical considerations in Liverpool
Availability in Liverpool is the factor that decides most outcomes here. Confirm the 1.0 Ω mesh and the Micro-USB are both in stock before committing, and check that the 510 thread matches your existing device if you already own hardware. Duty and GBP rates move, so treat prices as current rather than fixed.
Questions about a specific configuration? Send the model name and we will confirm the parts that fit.